Do not use abrasive cleansers or acidic solvents on Vikrell surfaces as they may cause surface dullness or discoloration. Wipe your bath or shower unit with a soft cloth after each use to prevent a buildup of soap scum. Do not use bleach on decorated Vikrell material.
Vikrell is one brand of many in the realm of poly composite bathtubs and other home fixtures. With Vikrell, the underlying material of the tub consists of fiberglass and polyresin. Basically, it is comprised of very thin fibers of glass, along with plastic.
Fill your bucket with a half-gallon of hot water and two tablespoons of dish soap. Dip a scrub sponge or a stiff nylon brush into the bucket, and scrub all bathtub surfaces. Use the bucket to periodically rinse out the sponge or brush and to transfer soapy water into the tub.
Vikrell is a blend of resin, fiberglass and filler that creates a smooth, glossy, durable tub surface that is resistant to chipping, cracking and staining. The non-porous surface is fairly easy to clean.
Both Vikrell and acrylic are popular materials for bathtubs and other shower fixtures. Because of their lightweight structure, both are good options for moving into a new home or for bathrooms that can’t handle too much stress. That is why they are equally popular choices for residential and commercial shower spaces.
Sterling came into the Kohler fold in 1984, providing a mid-priced, full-line plumbing brand that was tough as it was beautiful. Since then, Sterling has been a brand of Kohler, a company with a world-class reputation of its own as the recognized leader in kitchen and bath design.
Acrylic tubs are made of vacuum-formed sheets of acrylic, often reinforced with fiberglass for added durability. Since the material is inherently soft and supple, it’s the perfect material for a large variety of tub shapes and sizes. Acrylic is lightweight, so it can be installed on any level of the home.
On average, acrylic tubs last around 10 to 15 years, significantly longer than a fiberglass tub.
Fiberglass is the best bathtub material for a lightweight, inexpensive and easy-to-clean tub. Porcelain-enameled steel and wood retain heat extremely well, while the best bathtub material for a quiet sound while filling is porcelain-enameled cast iron.
The differences between fiberglass and acrylic showers and tubs extends beyond aesthetics. When it comes to durability, acrylic lasts much longer than fiberglass. Acrylic is harder to scratch or puncture than fiberglass, and therefore requires fewer repairs and typically has a longer life expectancy.
Pour 3 cups of white vinegar under the running water as the tub fills. Turn off the water once it covers the discolorations. Leave the vinegar and water to work on the stains for about 4 hours. Drain the water from the tub and wipe away the hard water stains with a sponge.
Hydrogen Peroxide: fill a spray bottle with 3-percent hydrogen peroxide. Let the solution sit for 10-15 minutes and then wipe the tub down with a damp sponge. You can repeat these steps until the yellow staining disappears.
Baking soda is a basic compound called sodium bicarbonate. Vinegar is a diluted solution that contains acetic acid. The baking soda and vinegar reaction is actually two separate reactions. The first reaction is the acid-base reaction. … This creates the bubbles and foam you see when you mix baking soda and vinegar.
In general, if you have an acrylic tub, it’s best to use non-abrasive cleaners such as dish soap, Clorox wipes, or a mixture of vinegar and water. Do not try bleach or abrasive cleaners like steel wool on the tub. However, the Magic Eraser from Mr. Clean® is a safe option as long as you are gentle when scrubbing.
- Remain outside of the shower and move the head of the shower away from you. …
- Spray the cleaner on one wall of the stall. …
- Scrub the entire wall with a nonabrasive sponge. …
- Rinse the soap off with the showerhead or a spray bottle.
Wipe out bath/whirlpool after each use with soft cloth or squeegee. Avoid abrasive materials. Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
On November 16, 1988, Sterling bought Kinkead Industries (a subsidiary of USG Corporation) and its manufacturing plant in Union City, Tennessee. This purchase added folding shower doors, tub and shower enclosures to the Sterling family of products.
Acrylic Shower Pans Mostly, acrylics are used for other parts of the shower. Acrylic is a safer and flexible material that is heated, stretched, and molded into their shapes. Acrylic is made to withstand many showers before showing signs of breakage. This material is water-resistant and will not experience corrosion.
STERLING, a KOHLER Company 71171120-0 Ensemble Vikrell Right-Hand Drain Rectangular Skirted Bathtub, 60″ L x 30″ W x 16″ H, White.
Built in Indonesia with the highest standards in mind, all Sterling by Music Man instruments are designed by Ernie Ball’s world class team of engineers.
The Kitchen & Bath Group includes the well-known KOHLER®, STERLING®, Englefield, Hytec, Jacob Delafon® and Karat plumbing brands; European showering brands Mira, Daryl and Rada; and cabinetry brands CANAC® for the home, and ROBERN® and Sanijura for the bath.
Technically it is a caulkless tub surround. However you should caulk it. Use any silicone caulking for inside the joints where the walls connect then use clear silicone caulking for a small bead from the top of the connection joints down to the tub.
According to most acrylic tub manufacturers, all it takes is some warm, soapy water and a soft cloth to effectively clean your acrylic tub. … Many acrylic tub manufacturers warn against using bleach or other abrasive cleaners as this “may void the warranty” on your bathtub.
The baking soda can clean mold, mildew, and soap scum. It’s also gentle to use on the acrylic tub.
Look around the tub’s edges and see if it appears thinner; this could be an indication that it is acrylic. Acrylic tubs usually come in more colors than fiberglass tubs, as fiberglass tubs are commonly white. Acrylic also feels warmer to the touch than fiberglass, and tubs made of acrylic have smoother finishes.
If your bathtub should happen to scratch or dull, you can easily restore the appearance back to new. Scratches and dulling can be removed with a liquid polisher such as Gel-Gloss or metal polish. Deep scratches or burns can be removed by use of very fine sandpaper and then finishing with a liquid polish.
Acrylic material is heated plastic stretched over a mold. Fiberglass is sprayed with a gelcoat mixture over a mold. This means that the acrylic process is more hands on and not as manufactured. … Fiberglass tubs can quickly fade and cracks and scratch happen often.
Porcelain enameled steel is a commonly used and comparatively inexpensive option when it comes to making bathtubs. These bathtubs tend to be heavier than acrylic and fiberglass bathtubs. They are extremely durable and are easy to clean.
A stainless steel tub will make a ticking or clacking sound. A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of paint.
If your tub has no give at all, then it’s steel or cast iron. Hold a magnet up to the tub; does it attract? If it’s magnetic, then it’s an enameled surface, but if it’s not magnetic, it’s porcelain.
A heated soaking tub is a soaking tub with a specialized pump installed. … As water is pumped through the system, the pump itself generates heat as it transfers water, which maintains the bath’s temperature and keeps the tub warm throughout use, ensuring that the user never runs the risk of the water getting cold.
Generally, cracking is commonplace in fiberglass bathtubs. Though the material is inexpensive, it is highly porous, meaning it will absorb water and it cannot withstand heavy punishment, meaning that fiberglass matches all three criteria for cracks to form.
Typically, a fiberglass tub has a lifespan of 10 to 15 years. The soft finish is also easy to scratch and crack, and over time, the color may begin to fade as well.
An important consideration when shopping for a new tub, shower or surround is the type of material of which the unit is made. The most commonly used materials are fiberglass, acrylic, PVC, solid surface materials, steel and cast iron.
Bleach is highly corrosive, so it’s always important to use it with caution. … A white bathtub can benefit from the occasional bleach treatment, but always use it in moderation. Simply pouring undiluted bleach directly onto the bathtub surface may cause the porcelain or other material to become permanently discolored.
Make a bathtub cleaner paste of one part hydrogen peroxide to two parts baking soda (or cream of tartar). Rub the paste on the stain and let stand for 30 minutes to one hour, then wipe and rinse.
Stains in the bathtub can occur from either trapped water not allowed to dry properly, which forms mildew, or from mineral deposits created by hard water. Regardless of how they got there, you don’t have to live with dark stains in your bathtub indefinitely.