If you are worried about using an abrasive cleaner on porcelain, metal scratches can be removed with an acid, such as lemon juice or white vinegar. Apply the acid of choice to the affected area and let it sit for several minutes. Do not scrub and instead monitor the change in color.
- STEP 1: Gently clean with liquid soap and dry.
- STEP 2: Skip scrubbing, and remove discoloration using bleach on white porcelain and hydrogen peroxide on colored porcelain sinks.
- STEP 3: Tackle deeper stains with a mild abrasive.
- Lift metal stains with a little bit of acid or naval jelly.
Get a bit of plumber’s rubber – it looks just like a pencil rubber (or eraser if you prefer) – and rub the scratch with it, then clean off with soap and water and buff with a soft cloth.
Removing aluminum marks from a porcelain sink is easy. Dampen the sink with water, and sprinkle a light dusting of baking soda over the aluminum marks. The water will help the baking soda adhere to the sink. Scrub the marks with a washcloth and rinse the sink.
- Clean and dry the porcelain sink with a sponge and dishwashing liquid soap. The black marks may still be visible. …
- Dry with a clean towel.
- Spray the black marks with undiluted white distilled vinegar. Let it sit for 10 minutes.
- Scrub with a non-abrasive sponge.
- Combine 1 tablespoon liquid dish detergent with 1/2 gallon of hot water. …
- Wipe out the interior of the sink with the detergent and a mildly abrasive sponge. …
- Plug the sink drain. …
- Drain the vinegar water from the sink. …
- Wipe the sink out with a clean towel after washing.
For smaller surface scratches, use baking soda for your porcelain sink scratch repair. After coating the scratch in a healthy layer of baking soda, buff it for a few minutes using a soft, damp cloth and rinse the affected area with warm water.
- Sprinkle on a layer of baking soda to fix light scratches. Buff it in with a wet sponge for about three minutes. …
- Use an abrasive cleanser to remove scratches and stains. …
- Remove deeper scratches and scuffs using a fine pore pumice stone. …
- Fix deep scratches with a porcelain repair kit.
- Mix together in a spray bottle: …
- Sprinkle baking soda in the sink and tub.
- Spray the baking soda with the diluted vinegar mixture.
- Allow it to sit for several minutes, but no longer than 15 minutes.
- Wipe on your porcelain sink or around your shower and tub using a cleaning cloth.
A number of gentle abrasive cleaners will remove these scratches with a little work on your part. Among the possibilities are tooth whitening powder, baking soda, an oxalic acid-based cleanser, a pumice stone and even a combination of soldering flux and steel wool.
While Bar Keepers Friend Cleanser is safe to use on most surfaces, including porcelain, always test it first on an inconspicuous part of the bathtub and fixtures.
Remove Rusty Residue from Porcelain For households with hard or iron-heavy water, rust stains on porcelain can be tough to get rid of. But a Magic Eraser makes short work of these stubborn red and brown streaks, easily restoring your bath, shower, or tub to like-new condition.
In cases where the scratches are relatively minor, baking soda can be used to remove annoying porcelain sink scratches. Simply sprinkle baking soda over the length of the scratch, or cover the entire nick with a hefty dose of baking soda. From there, buff the scratches and nicks with a soft, damp cloth.
If you have a hand-painted or glazed ceramic sink, clean with a non-abrasive cleaner. … This ceramic material is heated in a kiln at an extreme temperature, causing the clay to become less dense and porous. Porcelain is tough in durability and soft-looking in appearance.
If your sink is white porcelain, you can use regular bleach. However, if your porcelain is colored or vintage, it’s best to use liquid oxygen bleach such as hydrogen peroxide.
- Step 1: Clean the Sink. Remove dirt, grime and residue from the sink, using water, household all-purpose cleaner and a sponge. …
- Step 2: Sand the Damaged Area. …
- Step 3: Apply Repair Compound. …
- Step 4: Apply Porcelain Touch-up Paint. …
- Step 5: Replace Sink (Optional)
Use a non-abrasive porcelain polishing compound to remove pot marks and other stains. Apply the compound to the stains and gently rub with a soft cloth or a cork to remove the stains and polish your sink. As an option to using a commercially packaged polishing compound, make a paste with baking soda and hot water.
Applying olive oil can help eliminate small scratches on your stainless steel sink. Start by applying olive oil to a paper towel or soft cloth, rub it on the scratch, and wipe the area dry. You can repeat these steps multiple times to minimize the appearance of any small scratches.
2 It Will Get Stained (And Potentially Chipped) If you opt for a classic white porcelain farmhouse sink, it’s very likely to get stained, and it will require regular cleaning to keep it sparkling. Scrubbing the sink with baking soda will help remove sauce stains, yet this mild abrasive won’t scratch the surface.
- Begin by sprinkling baking soda over the surfaces that are marked. It may help to spray the sink lightly with water first, so the baking soda will stick. …
- Spray the surface lightly with Windex.
- Scrub with a soft cloth or sponge until the stains are removed.
- Repeat as necessary.
The pot marks look like scratches, but they do not penetrate the enameled surface. To clean, apply a small amount of KOHLER Cast Iron Cleaner (K-23725) to the marks. Use a soft cloth or cork to gently rub the marks away.
The answer is enamel. Cast iron does last and is incredibly difficult to damage, but it’s also prone to rust. … Although still quite tough, the coating on your sink is more susceptible to chipping and scratching than the cast iron underneath.
While hydrogen peroxide is not normally used for cleaning surfaces, there is nothing in normal glazed porcelain that it would damage. Porcelain is about as unreactive to most things as glass, which is unreactive enough to be used for the bottles that store hydrogen peroxide.
Dilute 1 part household bleach with 5 parts water. Pour the mixture onto the towels until they are soaked through. Remove the towels after eight hours and rinse the sink. The bleach removes any remaining stains or deposits so the sink shines again.
Drains: Mix one cup of peroxide with one tablespoon of baking soda. Pour it down the drain. The foam will help clean your drain and leave it smelling fresh. Toilet Bowls: Use half a cup of hydrogen peroxide in a toilet bowl.
Unfortunately, it is generally unwise to use pumice or steel wool on porcelain fixtures: while it may get rid of stains, it will also scratch the finish. This creates areas for stains and bacteria to adhere directly to the porcelain.
Warnings. Do not use pumice stones to clean marble, laminate, plastic or fiberglass toilets; doing so will result in permanent scratches. A dry pumice stone will also scratch porcelain, so be sure to keep the stone and the toilet surface wet at all times.
But—you guessed it—you shouldn’t be using steel wool pads to remove stains inside your toilet bowl. “The porcelain is delicate and the pads may scratch the finish [beyond] repair,” says Justin Carpenter, owner of the Dallas house-cleaning service Modern Maids.
Use Bar Keepers Friend regularly to prevent stain buildup. Do not mix Bar Keepers Friend with other household cleaning products including those with detergent or bleach!
The primary difference between Bar Keepers Friend and Comet’s ingredients is that Bar Keepers Friend is acid-based, while Comet is bleach-based. Oxalic acid is the main ingredient in Bar Keepers Friend, and Comet’s main ingredient is trichloroisocyanuric acid (bleaching agent).
The good news is that vinegar won’t damage your porcelain tiles as long as it’s used properly. … This is because too much exposure to strong vinegar could strip away the finish on your porcelain. This will leave it more liable to damage and looking a bit worse for wear.
Try cleaning your sink with a paste of baking soda and water. You can then rinse the sink with vinegar, which will bubble and fizz. Vinegar naturally disinfects while helping remove hard water stains from your stainless steel sink. Once your sink is clean and dry, you can easily add an extra shine.
Magic Eraser is a Mr. Clean-branded line of cleaning pads made with chemicals that should not be consumed or used on any body parts. Dr. Richard Black, dean of the Hunt School of Dental Medicine, said trying dangerous trends such as this one could pose lifelong damage to your teeth.