How do you secure concrete pipes? how to tie down pipe on trailer.
Contents
Secure Them With Stakes An effective way to keep those inflatable decorations secured in the ground is by using stakes. The majority of inflatable decorations have a wide base that includes holes for stakes. Take a few small lawn stakes and pound them into the ground as far as possible.
A good anchoring system that isn’t too obstructive is rebar and rope. Using a rubber mallet, pound the rebar or other heavy-duty metal stake into the ground behind your decoration. Then attached a sturdy chain or heavy rope, preferably to a hole or opening on the back of the item.
To prevent the wind from blowing them away when they are inflated, tether them to the house, a railing or a ground screw anchor with soft nylon cording or a zip tie. If an inflatable has feet or a base, fashion U-shaped pieces of wire that fit over them and extend a foot or so down into the soil.
Tie Straps If your outdoor tree is near a fence or railing another option is to use a ratcheting tie strap. Place the tie strap around the trunk and the railing and secure it tightly. This option can work well for both artificial and real cut Christmas trees.
A simple way of securing pots, planters and some types of statuary or garden ornaments is to secure them to a land anchor. A land anchor is a barbed device that is hammered into the ground, and which has a chain or steel cable attached to it, to which the pot, planter or statuary can be secured.
Pound a rebar or metal stake into the ground directly behind your lawn decoration using a rubber mallet. Attach the decoration to the stake using sturdy rope or chain, preferably through holes or openings in the back of the decoration to hide them from view.
- Hammer the anchor in, it will automatically rotate, cutting a neat thread in the ground.
- Hammer down to ground level then fit the bracket.
- The structure is secure. …
- If removal is required, simply unbolt the bracket and unwind the anchor.
Use cement to mortar them directly to wide concrete pavers. Provide weights for inflatable decorations by using small sandbags or stones tied to them with sturdy nylon string. Or, pin them into place with tent stakes or “U”-shaped wire pins pushed firmly into the soil. Consider the weight of your ornament.
Statues that stand next to walls or posts can be secured to the wall or post with eye-bolts or eye-screws and light cable. If you don’t have a post hole digger you can dig a hole slightly larger than the base of the statue and fill it with cement to use as an anchoring base.
Place your tree in the corner of your room. Take some fishing line and wrap it around the trunk of your tree. Then, attach the ends of the line to hooks on the wall. Doing so could prevent a holiday accident.
Secure the Tree sheets, or smaller, at any home center. If you really want to lock it down, use 1/4-in. pan head machine screws to mount the tree stand to the wood. If you have wood or tile floors, just put some duct tape over the screwheads so they don’t scratch the floor.
Extension cords that feature locking plugs will make it more difficult for thieves to steal your Christmas decorations. If your decorations come with stakes or cables to tie them down,make sure you use them. If your decorations haven’t come with these, landscaping stakes can be used instead.
- Hang a vinyl siding hook on your house. This is the most efficient method. …
- Attach a cup hook to the side of your house. …
- Hang a wire hook from the vinyl soffit trim.
They are lightweight, corrosion-resistant anchors that can be installed from ground level, either by hand or using portable equipment, depending on size and ground conditions. When loaded, they exert pressure on a cone of the ground that surrounds their length, providing very good resistance to movement.
DUCKBILL® anchors, a patented labor and time saving device, work like a toggle bolt in soil. … An upward pull on the anchor tendon rotates the DUCKBILL into a perpendicular “anchor lock” position in undisturbed soil. The result: superb holding capacities.
Ground screws are the innovative foundation solution that bypasses the need for traditional foundations like concrete and offer the perfect solution for projects on sloping, uneven ground or in hard-to-access areas. … ground screws are 70% faster to install than concrete – and you can build on them straight away.
A plastic or cardboard decoration can be secured with a stake attached by duct tape to its back. If a piece is rather large and flimsy, drill or poke a few holes in it to allow wind to flow through; the holes will give the piece a better chance of remaining in place during strong wind gusts.
We recommend bolting the piece to a secure base: e.g., a concrete patch, pad or prefabricated metal* or wooden base that can secure the base of the sculpture. The recommended method is to drill holes big enough to fit 3/8” or larger bolts, or bolting mounting brackets on the base, which can then be secured.
Dig a trench in the soil where you will place your sculpture. This trench should be equal to the length and width of the sculpture, and should be between 4 and 16 inches deep depending on the weight of the sculpture. The most common depth for a statue foundation is 8 to 12 inches deep.
To straighten a tree that is leaning over, wedge a Wobble Wedge plastic shim between the tree and the stand or to level your tree stand at the base. Wobble Wedges are available in a variety of colors and sizes so you can choose the leveling wedge best for your project.
Yes, you can use fake Christmas trees outside to decorate your porch or yard. The best Christmas trees for this will be labeled for indoor and outdoor use. … But you should avoid using prelit trees if they are labeled for indoor use only.