BEHR PREMIUM Solid Color Concrete Stain is a durable, water repellent, solid color stain. It is designed to help protect and enhance both interior, exterior, vertical and horizontal, concrete surfaces. This siliconized, 100% acrylic formula, forms a strong, long-lasting opaque film on properly prepared surfaces.
How do you stain dark wood light? how to change wood color from light to dark.

Is Behr a good concrete stain?

BEHR PREMIUM Solid Color Concrete Stain is a durable, water repellent, solid color stain. It is designed to help protect and enhance both interior, exterior, vertical and horizontal, concrete surfaces. This siliconized, 100% acrylic formula, forms a strong, long-lasting opaque film on properly prepared surfaces.

Does Behr concrete stain need a sealer?

OPTIONAL TOPCOAT SEALER: For added protection, use Behr wet-look sealer for a high-gloss finish or Behr low-lustre sealer for a low-gloss finish. Allow stain at least 4 hours to dry before topcoating. Follow all label instructions.

What is the difference between Behr concrete stain and dye?

When it comes to concrete stain vs. dye, the main difference is that a stain will chemically react with the concrete, while a dye will simply permeate the material.

How long does Behr concrete stain take to dry?

The surface must be fully cured before use. Allow 24 hours for light foot traffic. Allow 72 hours for heavy foot traffic and furniture.

How much does a gallon of concrete stain cover?

On average, acid stains will cover 200 to 400 square feet per gallon, while water based stains will cover slightly more at about 250 to 450 square feet per gallon.

Does solid concrete stain peel?

How long does concrete stain last? Because stains penetrate into the concrete surface, their color is durable and long-lasting. When applied to properly prepared concrete, the color will not fade, chip, or peel away.

Can you use deck stain for concrete?

Never apply stain to a concrete surface until you have cleaned it thoroughly, or the stain will not be able to soak into the surface. … You can use most any kind of wood stain to coat concrete as long as you take the proper preparation steps to condition the surface to accept the coating.

Which concrete stain is best?

  1. Kemiko Stone Tone Concrete Stain – Best Overall. …
  2. Concrete Coatings VIVID Acid Stain – Best Value. …
  3. Concrete Resurrection Cement Stain – Premium Choice. …
  4. Rust-Oleum 247162 Concrete Stain Spray. …
  5. EnduraCoat Acid Stain DIY Kit. …
  6. BrandBold Brilliance Concrete Acid Stain.

Can you stain concrete without sealing?

Conclusion. So, there really isn’t a benefit to not sealing your concrete unless for some reason you want it to have a duller color. We would still advise sealing the concrete, but applying a matte wax instead of a glossy one to get the appearance that you desire.

Can I roll on concrete stain?

Use a roller with extension pole or a sprayer to apply concrete stain over the rest of the surface evenly. Apply first coat evenly, working in one direction. Allow to dry at least 2 hours before applying the second coat.

Is it better to paint or stain concrete patio?

For the ultimate in long-lasting, durable color, choose concrete stain. Because concrete stain doesn’t just sit on the surface of the concrete, but actually penetrates into the pores of the concrete to some degree, your color is not going to peel, chip, or flake.

Is stained concrete slippery?

Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.

How long does concrete staining last?

Durability of Stained Concrete Few materials have the longevity of concrete. And because stains permeate the concrete to infuse it with permanent color, a stained concrete floor or pavement should last a lifetime when properly maintained (see How to Protect and Maintain Stained Concrete .

Is concrete stain a sealer?

About Concrete Stain + Sealer Additionally, it can be used without tint as a stand-alone sealer over bare or stained concrete surfaces. It forms a protective barrier to keep water out, protects against stains, and extends the life of your concrete.

Can old concrete be stained?

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

Do you need primer for concrete stain?

Concrete paints completely cover and protect the concrete surface, but require a lot of prep work. … Seal the concrete with a primer-sealer product to prevent it from moisture retention before applying a concrete paint. Concrete paint works for both indoor and outdoor application, as does a concrete stain.

How do you color concrete after it dries?

Allow acid stain to react with the concrete floor for at least 6-hours. Clean residue and pour water on floor to approximate the final color. If darker color is desired, apply a second coat. Clean residue from floor with degreaser and neutralizer solution using an acid brush.

Can you stain concrete without etching?

You may get marks that look like water spots,” he says. Schmidt also warns against acid etching of floors before staining. A lot of people think they need to acid etch the concrete like they do before applying a paint or coating, to get the paint to adhere. … Micro-Degreaser Non-acid cleaner for staining prep.

Can you dilute water based concrete stain?

To produce various concentrations of color, you can dilute the stain by adding water, either by wetting the concrete before the stain is applied or by spritzing the concrete after stain application with water from a spray bottle. Don’t expect color consistency or perfection.

What is the difference between concrete stain and acid stain?

The main difference between an acid stain and a water based concrete stain is how they interact with the concrete. Acid stains have a muted more natural coloring. They penetrate into the concrete’s pores and interact with it’s natural coloring.

Can you stain concrete with Minwax?

I found a quart of Minwax Early American wood stain that was almost full. I figured I’d try it out so I started in the back corner using a foam brush – I figured the stain would soak into the raw concrete. And it worked beautifully!

How do you color concrete?

You can use dyes to color concrete, such as food coloring or fabric dye. The method for coloring concrete this way is to add the dye to the water before mixing it into the dry concrete mix. What is this? Adding a food coloring dye won’t make the concrete color as concentrated as it would with a fabric dye.

How do you seal concrete after staining?

After surface has thoroughly dried, apply two or more coats of sealer to concrete using a brush, lamb-wool applicator or spray-equipment. Allow surface to dry 1-3 hours between coats depending on temperatures. When using a film-forming sealer (Multi-Purpose or Lacquer), use thin, even coats.

Can I stain my concrete floor myself?

A stained concrete floor is a great and durable flooring option, and – good news! – staining one yourself is a surprisingly easy task (although you’ll want to avoid one major pitfall we fell into below).

Can you stain your own concrete patio?

Staining concrete is a fast, simple way to turn your dull gray patio into a lively, colorful surface that will make your outdoor space more inviting. The stain is nearly foolproof to apply—just wet the concrete and spray on the stain.

Which is better epoxy or stained concrete?

Both stained concrete and Nature Stone flooring will last for years with proper care, but stone epoxy tends to be slightly more durable than stained concrete. The reason for this is because the sealant used on top of stained concrete wears down faster than stone epoxy.