Contents

Which sliding compound Mitre saw is the best?

  • DEWALT DWS780 Sliding Compound Miter Saw. …
  • Makita LS1019L Sliding Compound Miter Saw. …
  • Bosch Power Tools GCM12SD Sliding Glide Miter Saw. …
  • DELTA 26-2241 Compound Sliding Miter Saw. …
  • CRAFTSMAN CMCS714M1 Compound Sliding Miter Saw.
What is the highest rated 10 inch sliding miter saw?

  • Hitachi C10FCH2 10” Miter Saw.
  • Makita LS1016L10” Miter Saw.
  • DEWALT DW713 10” Miter Saw.
  • DeWalt DWS780 12” Miter Saw.
  • Bosch GCM12SD 12” Miter Saw.
  • DeWalt DWS715 12” Miter Saw.
Which is the best Mitre saw to buy?

  1. Ryobi. EMS190DC 18V ONE+ Mitre Saw.
  2. Evolution. R255SMS 240V 255mm Sliding Mitre Saw.
  3. Makita. LS0714LN 190mm Slide Compound Mitre Saw 240v.
  4. Evolution. FURY6 210 Multi-Purpose Mitre/Table Saw.
  5. Draper. Precision Hand Mitre Saw.
What is Dewalt XPS technology?

Essentially XPS technology uses an LED to project light down either side of the blade, creating a shadow of the blade in the work area. As the blade lowers, the shadow sharpens, darkens and shows exactly how wide the cut will be once it’s made.

Can a 10 inch sliding miter saw cut a 2×8?

Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. Saws also differ by whether the blade arm simply rotates (a basic miter saw) or both swings and slides (a sliding miter saw).

Whats the difference between a compound Mitre saw and a sliding Mitre saw?

What is this? The sliding miter saw features rails that allow the blade to move forward and backward. This means that the sliding miter saw can handle much wider materials than your basic miter saw or compound miter saw.

What should I look for in a compound miter saw?

Miter saws should have detents at the most common angles: 90°, 45°, and 22.5° at least. Look for a saw with an easy, smooth detent override that allows you to move the saw without the detent engaging each positive stop along the way and back.

Is a double bevel miter saw worth it?

Use a double bevel miter saw when you need to make a lot of bevel cuts in different directions. I bought a dual bevel miter saw for my workshop because I plan to install new baseboards throughout the house, and this will make the job much easier.

Is Evolution a good brand?

Evolution are now one of the fastest growing power tool brands in the world. Thriving on the success of their range of TCT multipurpose products, along with many other exciting innovations.

What is XPS on a Mitre saw?

How does the XPS system work? In a nutshell, the XPS module projects LED light along both sides of the blade, forming a shadow of the blade on the workpiece. As the saw blade is lowered towards the workpiece, the width of the shadow sharpens, darkens, and closely matches the thickness of the saw blade’s kerf.

What is the difference between DeWalt 779 and 780?

This is another significant difference between the two machines. The DeWalt DWS780 has a stainless-steel detent plate with a cam lock. It also has a rail lock, which allows you to cut vertically with more success. … On the other hand, the DeWalt DWS779 has a double horizontal rail with an excellent clamping system.

Can I add a laser to my DeWalt miter saw?

The DW7187 Adjustable Miter Saw Laser System was designed for the professional miter saw user and will only fit the DEWALT DW715 (Only Type I and Type II compatible), DW716 (Type 1-4) or DW718 (all types) 12” Miter Saws.

What is an advantage of a sliding compound miter saw?

They can quickly create bevels at any angle. Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.

Can a miter saw cut a 6×6?

The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6. The capacities in the specs (page 36) are based on the widest and thickest pieces that could be cut laying flat.

What is the difference between a chop saw and a miter saw?

Whereas chop saws are rugged and relatively simple tools, mitre saws are designed and manufactured to make precision cuts at many different angles. Although a mitre saw can cut non-ferrous metal when used with the correct blade, they are most often used by joiners, kitchen fitters and cabinet makers to cut wood.

Are sliding miter saws accurate?

Chop-cutting accuracy at 90° was on par with other saws at 1/256 inch in 4 inches and slide accuracy was good at 1/128 inch in 12 inches. While the 90° straight cuts were good, slide miter cuts were only fair. The blade shows some measurable and visible wobble and the head has some deflection.

What is a dual bevel sliding miter saw?

Standard miter saws have motors (with their blades) that can be rotated to make cuts at a range of miter angles but can cut only straight down, at 90 degrees. … Double-bevel miter saws are compound saws that tilt to both the right and left so you can bevel in both directions without flipping the workpiece.

What size board will a 10 inch sliding miter saw cut?

A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.

Is the Hercules miter saw good?

The Hercules 12-inch Dual-Bevel Sliding Miter Saw This sliding miter saw is definitely a tool for professionals. But its ease of use means it’s also a great starting point for those who are new to miter saws. In my opinion, its dual bevel and LED shadow guide make it suitable for professionals and hobbyists alike.

Who manufactures Hercules miter saw?

Hercules 12-inch Double-Bevel Sliding Compound Miter Saw Hercules is actually a pro line of tools from Harbor Freight, which we all love for the deals you can find there.

What is the difference between a double bevel miter saw and a single bevel miter saw?

Simply put, single bevel miter saw possesses a saw head that only rotates (bevels) in one single direction (generally to the left). A dual bevel miter saw has a saw head that rotates in both directions, typically 0° – 48° both left and right, and can make bevel cuts in both directions.

How much does a good miter saw cost?

A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.

What does single bevel mean on a Mitre saw?

A single bevel miter saw only adjusts its positioning in one direction: to the left or right. Therefore, a single bevel miter saw allows you to make one-directional bevel cuts. Single bevel miter saws can make both bevel cuts and miter cuts independently or together.

What does single bevel Broadhead mean?

A single bevel broadhead is only ground on one side (opposing sides of the blade). Our single bevel is right side bevel. Double bevel heads are our number one seller and highly recommend by dead animals all over the globe.

What is the difference between sliding and non sliding miter saw?

Well, put simply, a sliding miter saw contains rails, with the blade able to move both forwards and backwards thanks to these rails. A non-sliding miter saw doesn’t have these rails and the option to slide.

Is the evolution Mitre saw any good?

Conclusion. The Evolution Rage3 TCT Multipurpose Sliding Miter Saw is unique in its abilities to cut plastic, metal, and wood with one saw and one blade. … However, it’s accurate enough for general contractors who need to cut multiple material types—and it cuts each of them very well.

How long are Evolution blades?

Cut Longer An Evolution mild steel blade can last as long as 20 or more abrasives and maintain its quality and capacity throughout, saving time and dollars.

What is a shadow line on a Mitre saw?

The shadow shows you exactly where the cut will be, and is perfectly sized to the kerf of the blade when the blade is lowered and placed in contact with the work during setup. …

Does the DeWalt DWS780 have a laser?

A: The 779 does not have a laser guide. The major difference between this saw and the 780 is the addition of the XPS LED (for a $300 price addition.). … A: There is no laser system. For $200.00 more, the DWS780 has an LED that projects a straight line shadow onto the material you are cutting..

What is cutline blade positioning system?

The saw features a Cutline Blade Positioning System where a light on the blade creates a shadow indicating exactly where the cut will be made on the workpiece.

Is the Dewalt 779 discontinued?

The DeWALT DWS779 is now discontinued and selling at a reduced price. It was replaced by the DWS780 which is the updated model with some additional features. Unlike the DWS780, the DWS779 does not have the XPS light that indicates the cut line on the workpiece.

Which Dewalt saw is best?

  1. DEWALT Miter Saw DWS780 – Best overall. Check Latest Price. Our favorite DeWalt miter saw is the DeWALT DWS780. …
  2. DEWALT Mitre Saw DW715 – Best for the Money. Check Latest Price. …
  3. DEWALT Miter Saw DCS361B. Check Latest Price.
Is Dewalt 779 good?

There is a reason why the DeWALT DWS779 12″ dual bevel sliding compound miter saw is top rated in miter saws. It is easy to use and a power horse. The cutting capabilities are impressive, 13 3/4″ wide cross cut, 50-60 deg miter angle cuts and up to 49 deg bevel angle cuts.

What is XPS shadow line?

How The XPS Shadow Line Works. … There are two led lights that shine onto either side of the blade of the saw which creates a shadow on the cutting surface so you can see exactly where the blade will cut. Not only will it show you the line that the blade will cut it will also show you thickness or kerf of the blade.

How important is a laser guide on a miter saw?

Miter saws with laser beams have been utilized to mark perfect blade paths across a wide range of wood types. This is a premium feature as not all saw has it. The lasers work reasonably well to enable you to make more accurate cuts using your miter saw.