What’s a spider lamp shade?

The fitting is simply attached to the bulb holder by unscrewing the holder cap inserting the spider and screwing the cap back on. The lampshade frame simply sits on top.

There are four types of lighting to consider—decorative, accent, task and ambient. Understanding your purpose will determine if the shade needs to be broad and translucent (task and ambient) or colorful and opaque (decorative and accent).

1. Top denotes the diameter (or width, if measuring a square lamp shade) of the top of the lamp shade.
2. Bottom denotes the diameter (or width) of the bottom of the lamp shade.
3. The slant is the length of the side of the lamp shade.

• Your shade should be about two-thirds the height of your lamp base (give or take an inch).
• Proportion is the key – too tall and the effect will be top heavy, but too short and your lamp will look out of balance.

Spider Fittings: Spider fittings are the most common type of fitting for table and floor lamps and are used with harps. The harp attaches to the lamp base, and the spider fitting sits on top of the harp and is often secured with a finial that screws onto the top of the harp.

Uno lamp shades are more versatile than those with clip-on or spider fitters. They have an inner ring that slips over the socket and are held in place by the bulb. This design makes it simple to replace the bulb. … Once you unscrew the bulb, you can attach the shade in seconds.

1. Colander. Use an old or new metal colander to create a lampshade. …
2. Buckets. Drill a hole in the center of the bottom of an old metal bucket. …
3. Clay Pots.

Lampshades come in all shapes and sizes and can be paired with the right sized lamp base when fitted well. … You also need to understand which fittings are ideal for different lamps. .

European-Style Lamp Shades Similar to traditional style lighting, a european-style lamp shade is highly ornate, and dedicated to elegant lighting designs embellished with sophisticated curves, iron clad scrolls, and nominal use of crystals or beaded ornaments.

Getting the shade size right The general rule of thumb is that a shade for a floor lamp should be 45cm (18 inches) or larger at the diameter of its base. That will give it a sensible proportion relative to the lamp base.

A lamp harp is the component of a lamp to which the lamp shade is attached. It typically comes in two separate parts, a saddle which is fastened under the lamp socket, and the harp itself which consist of a lightweight frame attached to the saddle at its lower end and extending upwards to a point above the bulb.

The width of the lampshade (diameter at the bottom) should be roughly equal to the height of the lamp base. The height of the lampshade should be about two thirds the height of the lamp base. The lampshade should be the wider than the widest part of the lamp base.

Several reasons, not the least of which is shipping costs and corrugated. It takes a lot of cardboard to protect shades during shipment. Furthermore they take up a tremendous amount of room, and shippers charge based on size for shipments that don’t weigh a lot. It can be crazy expensive.

White shades are best at lighting an entire room, while darker ones tend to funnel the light and make a more dramatic statement. When it comes to fabric, follow the generally accepted truths that silk is more formal than linen, textured materials or parchment shades.

A lampshade spider consists of metal arms that attach to the inside top rim of the lampshade and join in the center to a hollow round metal disc that looks like a washer. Spider fittings are also called “washer fittings.”

This Slip Uno Adapter Converts your Standard Spider Lampshade to fit on Slip Uno Lamp Base. Uno opening is 1 7/16 which is the most common size, so be sure to measure your bulb socket to make sure the diameter is less than 1 7/16.

EASY INSTALLATION – Converts your Standard “Spider-Fitter“ Lampshade to fit on Slip Uno Lamp Base Lamp. Easy DIY upgrade project. MEASURE YOUR SOCKET – Uno opening is 1 7/16″ which is the most common size, so be sure to measure your bulb socket to make sure the diameter is less than 1 7/16″.

The Outer Fabric The best fabrics for making your own lampshades are those made from natural fibers such as cotton or linen. Select a fabric that can be ironed; otherwise, it won’t look smooth when you adhere it to the styrene.

Painting a lampshade is an easy way to revamp an old shade or give it a new look to match your home decor and change the feeling of a room. Quickly give a lampshade a new coat of color with a can of spray paint or a paintbrush and paint of your choosing. Use paint to add stripes and other designs to a lampshade.

A lamp shade needs to be attached to a lamp base and secured into place. This is usually done by: Wire arms at the center of the shade frame sit on top of a “lamp harp“, secured by a finial (a spider fitter) Wire arms at the center of the shade drop down below the bulb and sit on the socket (an uno fitter)

OVERVIEW. Use this medium base socket ring for your pendant or other lighting. This ring is used to hold pendant glass in place without use of thumb screws.

A Euro fitter joins the lamp to the light between two parts surrounding the bulb, held in place by a thin gap that exists between the bulb socket and base. European Fitters are also known as ES fittings (Edison Screw or European Standard).

Lamp Shade Spiders and Carrier Adapters Those with a duplex fitting require an adapter, also known as a shade carrier, before you can use them on your table or floor lamps. Those with a duplex fitting that are intended for hanging from a ceiling pendant may require an adapter commonly known as a spider.

1. Unplug your lamp at the electrical outlet.
2. Remove the current shade and harp by unscrewing the finial, removing the shade, and squeezing the harp out of the saddle.
3. Squeeze the new harp into the saddle.
4. Add your new shade and screw on the finial to secure it.

To measure lamp harp sizes, take a measuring tape or a ruler. Then, note how many inches it runs from the topmost part of the harp to the socket cap. Generally, the height of the lampshade should not exceed the measurement of the harp plus ½ inch, and should not be smaller than the lamp harp’s height minus ½ inch.

Adapter allows attachment to the harp. The opening on this adapter is 1 9/16 Inches. A plastic washer (ring) is needed to hold the adapter tightly in place. Allows use of nearly any replacement lamp shade.

Harps are available in either regular or heavy duty weights. Our regular harps, which are available with either nickel or brass-plating, range in size from 4” to 15”, while our heavy duty harps, which are also available in nickel and brass plating, come in sizes from 7” and 15”.

Here are a few different ways you can map out how high your table lamp should be in each room. A good rule of thumb for a living room setting is that you will want your lamp shade to sit within eye level, or about 24 – 34 inches tall.