How do I fix my refrigerator from freezing food?

  1. Reset your refrigerator’s temperature. If your refrigerator is too cold, locate the temperature gage and adjust it accordingly. …
  2. Rearrange your food. Make sure that the food in your refrigerator isn’t touching any of the air vents. …
  3. Check your refrigerator’s door seals.
Why does my Kitchenaid fridge keep freezing up?

The temperature control thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature control thermostat is not working properly, it may cause the refrigerant system to run longer than necessary. As a result, the refrigerator will be too cold.

Why is my refrigerator freezing my food all of a sudden?

A thermostat is designed to automatically stop functioning as soon as the refrigerator achieves the set temperature. This helps to maintain a fixed temperature. If your thermostat is faulty, it can fail to switch off and continue to run, causing your fridge to freeze everything that is stored inside it.

What temperature should a Kitchenaid refrigerator be set at?

Controls are preset at the factory for normal household usage. If refrigerator is being used accordingly, ensure that control is still set at the recommended factory settings; 37 degrees Fahrenheit for the refrigerator and 0 degrees Fahrenheit for the freezer. Refer to the Owner’s Manual for settings.

Why is my Frigidaire refrigerator freezing food?

If the air damper is faulty or stuck open, then you will have too much cold air entering the fresh food compartment. This can result in the food in the fridge portion of the refrigerator to freeze. On most all refrigerators, the air damper is located where the cold air enters the fresh food compartment.

How do I run a diagnostic on my Kitchenaid refrigerator?

To enter the diagnostics mode: Press the control POWER button and the water filter RESET button simultaneously for 3 seconds. To advance the diagnostics sequence: To advance to the next step in the sequence, press and hold the water filter reset button for 2 seconds or until it beeps.

How do you defrost a Kitchenaid refrigerator?

The forced defrost function is performed on the refrigerator display. Hold the refrigerator door light switch closed in order to enter the Forced Defrost Mode. Press the refrigerator temperature down 3 times in a row.

How do you reset a KitchenAid refrigerator?

Reset a KitchenAid Refrigerator According to KitchenAid, the filter status light can be reset by pressing the filter reset button on the display and holding it until the light turns off. This will reset the refrigerator’s system.

How do you reset a KitchenAid refrigerator control board?

  1. Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.
  2. Power unit up by turning on the circuit breaker(s) or plugging the product back in.
  3. Ensure the cooling function is turned on.
  4. Test the control panel functionality.
Why does my side by side refrigerator keep freezing up?

Side-by-side refrigerators with a built-in ice maker may accumulate frost if the flap on the ice dispenser doesn’t close properly. According to Bob Vila, this allows warm air to enter the freezer side, condense and freeze, causing frost buildup over time.

Why is my lettuce freezing in my fridge?

Most refrigerators have a crisper drawer that is separate from the main food storage area, and this is where the lettuce and other vegetables should be stored. … The circulating air draws moisture out of the lettuce, making it limp before freezing. The rear and bottom of the refrigerator are the coldest areas.

What number should your fridge be at?

Based on these two factors here’s the number your fridge should be set on: If you’re always storing plenty of food you need the colder settings (3 to 4). If you’re not storing as much choose between 2 and 3. If the temperature is very low, ice will form and it may prevent air circulation.

How long will a KitchenAid refrigerator last?

How long do KitchenAid refrigerators last? The average life span of a KitchenAid refrigerator is between 15 and 17 years.

Does refrigerator have a reset button?

Some refrigerators have a reset button, and you can use it to restore the refrigerator to its original factory settings. However, if a refrigerator doesn’t have a reset button, you can unplug it from the power outlet for a few minutes. Then, when you plug it back in, the problem should get fixed.

How do you troubleshoot a refrigerator problem?

  1. Make sure the refrigerator is plugged in securely.
  2. Check for a blown fuse or tripped circuit breaker.
  3. Test the power outlet for current.
  4. Inspect the electrical cord for damage.
  5. Eliminate use of an extension cord, if any is being used.
  6. Check the outlet voltage.
Why is there water in the bottom of my KitchenAid refrigerator?

If the defrost drain is frozen, the water will overflow the drain trough and drip down to the bottom of the compartment. This water can eventually leak onto the floor. Check the defrost drain to determine if it is clogged or frozen. … In addition, flush the drain with hot water to ensure that it is clear of debris.

How long is the defrost cycle on a KitchenAid refrigerator?

IN 3-8 SECONDS, CONTROL WILL TURN ON DEFROST HEATER. DEFROST HEATER WILL TURN ON FOR 18 MINUTES OR UNTIL BI·METAL OPENS.

How do you know if your refrigerator compressor is bad?

You’ll know that your compressor is bad when it starts making abnormal noises, the compressor overheats or not providing proper cooling, or when the fridge compressor clicks on and off too frequently.

What happens when a defrost thermostat goes bad?

Defrost Thermostat Specifications. … A faulty defrost termination thermostat may result in the defrost heater never heating and a solid frost buildup on the evaporator coil, which results in too warm temperatures. The thermostat contacts are normally closed and have continuity until it reaches 140 degrees.

How do you defrost a side by side refrigerator?

  1. Open the refrigerator-side door and find the temperature control panel. …
  2. Locate the “Freezer-Fridge” “On/Off” button to the left of the freezer controls.
  3. Press the “On/Off” button and hold it down firmly for three seconds. …
  4. Allow the defrost cycle to run for at least 30 minutes.
Why is my freezer icing up?

Ice buildup occurs when warm or humid air comes in contact with the cold evaporator coils in your freezer (such as when you open the freezer door on a hot day). … If enough ice builds up on the coils, the flow of cool air in the freezer can become limited.